Compatibility and FittingsUpdated 3 hours ago
Thinking about connecting a Vital+ chiller to a different tub, or adding a Vital+ tub to a chiller you already own? Here’s what fits, what to check, and when to talk to us first.
Vital+ chillers with Vital+ tubs
| Tub | Compatible chillers |
|---|---|
| Ice Bath Pro, Ice Bath Barrel | All Vital+ chillers |
| Arctic White | Sold as a bundle with the Ultra X2 |
| Acrylic Tub | Sold as a bundle with the Acrylic Chiller |
| Cedar Solo, Cedar Duo | Ultra Max or Ultra Ice only (Ultra X2 for the Solo) |
The Cedar Tubs hold more water than our inflatables, so they need the extra cooling power of the Ultra Max or Ultra Ice to reach and hold temperature.
Fitting sizes
- Chiller connectors: a 1/2" BSP thread, used with 1/2" hoses.
- Cedar Solo ports: 1.5" threads.
- Conversion connectors: our chillers come with quick conversion connectors to suit the Vital+ tub range.
Vital+ hoses are made for Vital+ chillers. We can’t confirm they’ll fit another brand’s chiller.
Using a Vital+ chiller with another brand’s tub
It can work, but every tub is different. Before you connect anything, check:
- Port size and thread type. Measure the tub’s inlet and outlet ports and note the thread. You may need an adaptor to reach a 1/2" connection.
- Port position. The tub needs a separate inlet and outlet, ideally with the outlet low and the return higher up, so water circulates rather than short-cycling.
- Water level. The water must sit above the chiller’s inlet. If the tub’s ports sit lower than the chiller, water won’t flow and the chiller will show a water flow alarm.
- Volume. Check the tub’s fill volume against the chiller’s capacity. See Choosing Your Setup.
- Insulation and a lid. An uninsulated tub without a lid gains heat quickly, so the chiller will run longer and may not reach your target temperature.
Not sure? Send us photos first. Email us a photo of each port (with a tape measure in shot), a photo of the whole tub, and the tub’s volume. We’ll tell you whether it’s a good match before you buy or connect anything.
Good to know
- Region: chillers are wired for the country they’re sold in. A chiller bought overseas may not suit your power supply, and we can’t support it outside its region.
- Warranty: faults caused by poor water flow, incorrect fittings or running the pump dry aren’t covered. See Limited Warranty Policy.
- Spares: hoses, connectors and spare parts kits can be ordered separately. See Ordering Spare Parts.