Meet Our Original X1 ChillerUpdated a day ago
X1 Chiller
The X1 was the entry point to automated cold water therapy. A compact, straightforward 0.3HP chiller with no app connectivity, no complex settings, and one job: cooling your water and holding it at temperature. For first-time chiller users who wanted reliable performance without the learning curve, it delivered exactly that.
Recommended use: Smaller inflatable tubs (Pod, Pro, Barrel) for a single user. Not recommended for large or permanent tub setups.
Specifications
- Compressor: 0.3 HP
- Cooling: Down to 3–4°C (in ambient temperatures below 30°C)
- Input: 500W | Cooling capacity: 1,100W
- Refrigerant: R290
- Filtration: Small internal rear mesh filter + large external 20-micron cartridge
- Connectivity: Manual controls only, no WiFi
- Dimensions: 29 x 29 x 32 cm | Weight: 20 kg
- Sound level: ~55 dB
- Power: Standard 10A outlet
What's in the box
- X1 Chiller unit
- Large 20-micron external cartridge filter
- Small internal mesh filter
- Water pump
- 2 x insulated hoses
Cooling time
12–16 hours to reach the lowest temperature. Running overnight delivers the best results.
Setup
- Position the chiller on a stable, level surface close to your tub.
- Connect the inlet and outlet hoses to the corresponding fittings on the tub.
- Fill the tub with water before switching on. Ensure the water level is above the chiller intake.
- Set your target temperature on the control panel.
- Switch on and allow the unit to run. The X1 is best left to cool overnight.
Settings
Manual dial controls only. No app or WiFi connectivity. Set target temperature directly on the unit.
Benefits of this model
- Simple to operate with no app or WiFi setup required
- Compact and lightweight relative to higher-powered units
- Quiet operation at approximately 55 dB
- R290 refrigerant, a low global warming potential option
Setting the scene
You've just bought your first ice bath. The tub is inflated in the garden, you've read about the benefits, and you want a consistent, cold plunge without hauling bags of ice every time. You don't need an app. You don't need to dial in 2°C precision. You just want to fill the tub, set the temperature, and come back in the morning to something cold. The X1 is for that person. Set it the night before, wake up, and get in.