vitalplus logo
vitalplus logo

All articles

Ice Bath Maintenance

How often should I change or treat the water in my ice bath?

This depends on usage frequency and local water quality. Generally we recommend cleaning every 2 weeks or 3 if you are using the tub a few times each week. Our team personally uses their tubs every morning and replace the water every 3 weeks. Additio

What products can I use to sanitize my ice bath water?

Non-toxic water treatments or pool/spa-grade sanitizers (like chlorine or bromine tablets) in minimal doses can help maintain cleanliness. Always check the product instructions to ensure compatibility with your ice bath’s materials.

How do I clean residue or dirt from the inside walls of my ice bath?

Wipe down the interior with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or scrubbing pads that could damage the bath’s surface. Rinse thoroughly with clean water before refilling.

Do I need to empty the bath for deeper cleaning?

Yes. For monthly or deeper cleaning, drain the bath completely, then scrub using a gentle cleaner or diluted vinegar solution to remove mineral buildup or stains. Rinse well and allow the unit to dry before refilling.

How do I fill and drain the Ice Bath?

You can follow the below instructions and video links for draining your Ice Bath:.

How often do I have to replace the water in my Ice Bath?

Generally we recommend cleaning every 2 weeks or 3 if you are using the tub a few times each week. Our team personally uses their tubs every morning and replace the water every 3 weeks. Additionally, many of our customers are also using pool cleaning

How does the outside temperature effect the Ice Bath temperature?

Below is a general guide of the temperature you can expect your Ice Bath to be based on the ambient temperature.  Please note, these temperature ranges are intended as a general guide, and Vital+ cannot be held responsible for any variations outside

I need to complete patching of the tub

For small punctures:. 1. Punctures less than 1/8” in size can be repaired simply without a patch.2. Deflate your bath, then clean and dry the area to be repaired.3. Apply a small drop of glue to cover the puncture, and let it dry 12 hours before rein

How much chemicals, salts or magensium can I add to my set up with the chiller?

For chlorine usage, you can add about 1–2 teaspoons of chlorine granules per 100 gallons of water. Please note that chemicals are not allowed for the Chiller Max. Maintain magnesium concentrations at or below 50 parts per million (ppm). Chemicals are

Get Support