Your Cedar Tub is built to last a permanent cold plunge that gets better with time. This guide walks you through everything from unboxing to your first plunge. Read it once before you start; it'll save you time. Two people are recommended for positio

Your Cedar Tub is built to last a permanent cold plunge that gets better with time. This guide walks you through everything from unboxing to your first plunge. Read it once before you start; it&apos;ll save you time.Two people are recommended for positioning both models. Once filled, the tub should not be moved.<hr>Before you beginChoose your final location before the tub arrives. Think about:<ul><li style="font-size: 14px;">Surface &#x2014; flat, level, and stable. Pavers, decking, or concrete all work. Avoid uneven or soft ground.</li><li style="font-size: 14px;">Drainage &#x2014; you&apos;ll need to drain the tub periodically. Position it somewhere water can run off freely.</li><li style="font-size: 14px;">Outdoor placement &#x2014; a sheltered spot is preferred. Avoid prolonged direct rain on the cedar exterior where possible.</li><li style="font-size: 14px;">Clearance &#x2014; leave enough space around the tub to connect your chiller hoses and access the drain valve.</li></ul><table style="margin-right: calc(0%); width: 100%;"><thead><tr><th scope="col" style="background-color: rgb(0, 0, 0);"> </th><th scope="col" style="background-color: rgb(0, 0, 0);">Cedar Solo</th><th scope="col" style="background-color: rgb(0, 0, 0);">Cedar Duo</th></tr></thead><tbody><tr><td>Empty weight</td><td>~70 lb (~31 kg)</td><td>~140 lb (~77 kg)</td></tr><tr><td>Recommended clearance</td><td>30 cm all sides</td><td>40 cm all sides</td></tr><tr><td>Capacity</td><td>~100 gal (~380L)</td><td>~165 gal (~624L)</td></tr><tr><td>Dimensions</td><td>140 x 70 x 73 cm</td><td>155 x 107 x 71 cm</td></tr></tbody></table><hr>What&apos;s in the box<ul><li style="font-size: 14px;">Cedar tub (cedar shell + stainless steel liner pre-assembled)</li><li style="font-size: 14px;">Drain valve assembly</li><li style="font-size: 14px;">Hose fittings for chiller connection</li><li style="font-size: 14px;">User manual</li></ul><hr>Installation videos<table style="width: 100%;"><tbody><tr><td style="width: 100.0000%;">Watch this before starting. The video covers unboxing, positioning, hose connection, and first fill. </td></tr><tr><td style="width: 100.0000%;">&#x25B6; <a href="https://youtu.be/jU9zHxO636o" target="_blank" rel="noopener noreferrer">Cedar Tub Installation Guide</a> </td></tr></tbody></table><table style="width: 100%;"><tbody><tr><td style="width: 100.0000%;">If you&apos;re pairing with an Ultra Max Chiller, watch the chiller connection video too before filling. </td></tr><tr><td style="width: 100.0000%;">&#x25B6; <a href="https://www.youtube.com/watch?v=elur6H-K6iE" target="_blank" rel="noopener noreferrer">Ultra Max Chiller Connection Guide</a> </td></tr></tbody></table><table style="width: 100%;"><tbody><tr><td style="width: 100.0000%;">Let&apos;s get you paired with the&#xA0;<a href="https://www.tuya.com/product/app-management/all-in-one-app" target="_blank" rel="noopener noreferrer">Tuya App</a>, so your tub can work around your schedule. </td></tr><tr><td style="width: 100.0000%;">&#x25B6;&#xA0;<a href="https://youtu.be/yw-vdOUo5_0" target="_blank" rel="noopener noreferrer">Connecting The Tuya App</a> </td></tr></tbody></table>For full Ultra Max setup instructions, see <a href="https://support.getvitalplus.com/en-US/setting-up-your-ultra-max-chiller-6111125" target="_blank" rel="noopener noreferrer">Setting Up Your Ultra Max Chiller</a>.<hr>Step-by-step setupStep 1 &#x2014; Position the tubPlace the tub in its final location before adding any water. Use two people for the Duo. Once filled, neither model should be moved.Step 2 &#x2014; Connect your chiller hosesConnect the chiller inlet and outlet hoses to the fittings at the base of the tub before adding water. This is significantly easier to do dry please don&apos;t skip this step.Step 3 &#x2014; Close the drain valveConfirm the drain valve at the base is fully closed. Check it twice before filling.Step 4 &#x2014; Fill slowlyFill via garden hose and monitor the wood seams as you go. Leave the following space from the rim:<ul><li style="font-size: 14px;">Cedar Solo: 10&#x2013;15 cm from the rim</li><li style="font-size: 14px;">Cedar Duo: 15 cm from the rim (to allow for displacement with two people)</li><li style="font-size: 14px;">Keep in mind: Water levels must be above chiller height.</li></ul>Step 5 &#x2014; First fill behaviourMinor seeping at the wood seams on first fill is completely normal. Cedar absorbs water and naturally swells to seal gaps within 24&#x2013;48 hours. Leave the tub filled and monitor. Only empty if the leaking is significant.Water may also appear dark or tea-coloured for the first few fills. This is natural tannin leaching from the cedar wood it&apos;s harmless and reduces significantly after 3&#x2013;5 fills.Step 6 &#x2014; Power on your chillerOnce filled, power on your chiller and allow it to run down to your target temperature. Larger volumes take longer:<table style="margin-right: calc(0%); width: 100%;"><thead><tr><th scope="col" style="background-color: rgb(0, 0, 0);"> </th><th scope="col" style="background-color: rgb(0, 0, 0);">Estimated cooling time</th></tr></thead><tbody><tr><td>Cedar Solo</td><td>4&#x2013;6 hours</td></tr><tr><td>Cedar Duo</td><td>6&#x2013;8 hours</td></tr></tbody></table>In warmer climates or during summer, allow additional time. For contrast therapy sessions using the Duo, allow 30&#x2013;45 minutes for temperature to restabilise between sessions.<hr>First useOnce your tub has reached your target temperature, you&apos;re ready. A few things to keep in mind early on:<ul><li style="font-size: 14px;">Keep sessions short to start as your body adapts over time</li><li style="font-size: 14px;">Always have a warm towel ready before you get in</li><li style="font-size: 14px;">Never use the tub alone if you&apos;re new to cold water immersion</li></ul><hr>Care and maintenanceCedar exterior<ul><li style="font-size: 14px;">Rinse with clean water after use</li><li style="font-size: 14px;">For surface marks: lightly damp cloth, wipe gently, dry immediately</li><li style="font-size: 14px;">Leave the lid off or at an angle between uses to allow airflow</li><li style="font-size: 14px;">Never use bleach, abrasive pads, pressure washers, or solvent cleaners on the cedar</li><li style="font-size: 14px;">The cedar will naturally weather and develop character over time; surface variations and grain are features, not faults</li></ul>Stainless steel liner<ul><li style="font-size: 14px;">Wipe dry after draining</li><li style="font-size: 14px;">For mineral buildup: diluted white vinegar (1:4 ratio) on a soft cloth, rinse thoroughly</li><li style="font-size: 14px;">Never use steel wool, bleach, or abrasive powders on the liner</li><li style="font-size: 14px;">Check the liner periodically for surface corrosion and <a href="https://getvitalplus.com/pages/contact" target="_blank" rel="noopener noreferrer">contact us</a> if found</li></ul>Water care<ul><li style="font-size: 14px;">Replace water monthly with regular use, or sooner if needed</li><li style="font-size: 14px;">Use a compatible water sanitiser to maintain water quality</li><li style="font-size: 14px;">With the Duo and two-person use, sanitise more regularly</li></ul>Winter and storageDrain and store if temperatures are expected to drop below 32&#xB0;F (0&#xB0;C), the tub will be unused for 4+ weeks, or for any extended storage period.&#xA0;Do not allow water to freeze inside, any ice expansion will permanently damage the liner.<ol><li style="font-size: 14px;">Turn off and disconnect the chiller</li><li style="font-size: 14px;">Open the drain valve and attach a hose to direct water to a drain point</li><li style="font-size: 14px;">Once empty, dry the liner thoroughly with a soft cloth</li><li style="font-size: 14px;">Tilt the tub slightly to drain any residual water from the liner seams</li><li style="font-size: 14px;">Leave the drain valve open during storage</li><li style="font-size: 14px;">Store in a covered, sheltered position (indoors is ideal)</li><li style="font-size: 14px;">Do not store upside down as this stresses the cedar stave joints</li></ol>

Setting Up Your Cedar Tub

A premium freestanding ice bath with a rigid acrylic shell, designed for long-term indoor installation paired with a chiller unit. Your Acrylic Tub arrives fully assembled no inflation or panel installation required. Two people are recommended for po

A premium freestanding ice bath with a rigid acrylic shell, designed for long-term indoor installation paired with a chiller unit. Your Acrylic Tub arrives fully assembled no inflation or panel installation required.Two people are recommended for positioning. Once filled, the tub should not be moved.<hr>Before you beginChoose your final location before filling. Think about:<ul><li style="font-size: 14px;">Surface &#x2014; flat, level, and stable. Check that your floor can support the combined weight of the tub and water (~300&#x2013;350L when filled to the recommended level)</li><li style="font-size: 14px;">Indoor placement &#x2014; the Acrylic Tub is designed for indoor use and is not suited to prolonged outdoor exposure</li><li style="font-size: 14px;">Clearance &#x2014; allow space on both sides for chiller placement and hose access</li><li style="font-size: 14px;">Drainage &#x2014; position the tub somewhere you can easily run a drain hose when it needs emptying</li></ul><table style="margin-right: calc(0%); width: 100%;"><thead><tr><th scope="col" style="background-color: rgb(0, 0, 0); width: 31.0172%;"> </th><th scope="col" style="background-color: rgb(0, 0, 0); width: 68.8395%;">Acrylic Tub</th></tr></thead><tbody><tr><td style="width: 31.0172%;">Capacity</td><td style="width: 68.8395%;">~300&#x2013;350 litres</td></tr><tr><td style="width: 31.0172%;">Indoor use</td><td style="width: 68.8395%;">Yes indoor only</td></tr><tr><td style="width: 31.0172%;">Chiller compatible</td><td style="width: 68.8395%;">Yes, all models</td></tr></tbody></table><hr>What&apos;s in the box<ul><li style="font-size: 14px;">Acrylic tub (fully assembled)</li><li style="font-size: 14px;">Drain valve assembly</li><li style="font-size: 14px;">Hose fittings for chiller connection</li><li style="font-size: 14px;">User manual</li></ul><hr>Installation video<table style="margin-right: calc(0%); width: 100%;" id="isPasted"><thead><tr><th scope="col">Coming soon.</th></tr></thead><tbody><tr><td>&#x25B6; Installation video coming soon check back shortly.</td></tr></tbody></table><hr>Step-by-step setupStep 1 &#x2014; Position the tubPlace the tub in its final location before adding any water. Use two people. Once filled, the tub should not be moved.Step 2 &#x2014; Connect your chiller hosesConnect the chiller inlet and outlet hoses to the ports at the base of the tub before adding water. This is significantly easier to do dry please don&apos;t skip this step.Step 3 &#x2014; Close the drain valveConfirm the drain valve is fully closed before filling.Step 4 &#x2014; Fill the tubFill via garden hose, leaving approximately 10 cm from the rim.Step 5 &#x2014; Power on your chillerOnce filled, power on your chiller and set your target temperature via the unit or the TUYA Smart app.&#xA0;Allow 4&#x2013;6 hours to reach your target temperature from ambient, depending on room temperature and starting water temperature. Running the chiller overnight is a reliable way to ensure the tub is ready for a morning session.<hr>First useOnce your tub has reached your target temperature, you&apos;re ready. A few things to keep in mind early on:<ul><li style="font-size: 14px;">Keep sessions short to start with your body adapts over time</li><li style="font-size: 14px;">Always have a warm towel ready before you get in</li><li style="font-size: 14px;">Never use the tub alone if you&apos;re new to cold water immersion</li></ul><hr>Care and maintenanceAcrylic interior<ul><li style="font-size: 14px;">Wipe the interior with a damp cloth after each use</li><li style="font-size: 14px;">For mineral buildup: diluted white vinegar on a soft cloth, rinse thoroughly</li><li style="font-size: 14px;">Never use abrasive sponges, steel wool, bleach, or harsh chemical cleaners as these will permanently scratch and dull the acrylic surface</li></ul>Water care<ul><li style="font-size: 14px;">Use a mild, non-abrasive sanitiser to maintain water quality</li><li style="font-size: 14px;">Replace water regularly with daily use, every 2&#x2013;4 weeks is a reasonable guide</li><li style="font-size: 14px;">If the water is cloudy or has an odour, replace sooner</li></ul>

Setting Up Your Acrylic Tub

The XEN is a full-spectrum recovery system combining infrared heat, medical-grade red light therapy, and 16 modes of chromotherapy. Assembly is tool-free and takes around 30 minutes. Two people are recommended for assembly. Allow 1–2 hours for your f

The XEN is a full-spectrum recovery system combining infrared heat, medical-grade red light therapy, and 16 modes of chromotherapy. Assembly is tool-free and takes around 30 minutes.Two people are recommended for assembly. Allow 1&#x2013;2 hours for your first build.<hr>Before you beginChoose your final location before you start assembling. The XEN is indoor use only.<ul><li style="font-size: 14px;">Surface &#x2014; flat, level, and stable</li><li style="font-size: 14px;">Clearance &#x2014; enough space to open the door fully and access the control panel</li><li style="font-size: 14px;">Power &#x2014; dedicated grounded 10A outlet required; do not use extension cords, power boards, or share the circuit with other high-draw appliances</li><li style="font-size: 14px;">Ventilation &#x2014; keep airflow around the unit clear at all times</li></ul>Lay out all panels and components and match them against the parts list in your manual before starting. If anything arrives damaged, photograph it and <a href="https://getvitalplus.com/pages/contact" target="_blank" rel="noopener noreferrer">contact us</a> before installing.<table style="margin-right: calc(1%); width: 99%;"><thead><tr><th scope="col" style="background-color: rgb(0, 0, 0);"> </th><th scope="col" style="background-color: rgb(0, 0, 0);">XEN Full Spectrum Infrared Sauna</th></tr></thead><tbody><tr><td>Capacity</td><td>1&#x2013;2 person</td></tr><tr><td>Dimensions</td><td>39&quot;(W) &#xD7; 41&quot;(D) &#xD7; 77&quot;(H)</td></tr><tr><td>Wattage</td><td>1,700W (110V, 50/60Hz)</td></tr><tr><td>Max temperature</td><td>77&#x2013;158&#xB0;F (25&#x2013;70&#xB0;C)</td></tr><tr><td>Use</td><td>Indoor only</td></tr></tbody></table><hr>What&apos;s in the box<ul><li style="font-size: 14px;">Infrared heating panels</li><li style="font-size: 14px;">Control panel and remote</li><li style="font-size: 14px;">Two-person cedar bench</li><li style="font-size: 14px;">Protective eyewear</li><li style="font-size: 14px;">User manual</li></ul><hr>Installation video<table style="width: 100%;"><tbody><tr><td style="width: 100.0000%;">Watch this before starting. The video walks through unboxing, panel assembly, and electrical connection. </td></tr><tr><td style="width: 100.0000%;">&#x25B6; <a href="https://youtu.be/bFOf5wiAUkA" target="_blank" rel="noopener noreferrer">XEN Full Spectrum Infrared Sauna Installation Guide</a> </td></tr></tbody></table><hr>Step-by-step setupStep 1 &#x2014; Remove protective filmPeel the protective film from all infrared panels before assembly. This is required for correct heat output and is easy to miss.Step 2 &#x2014; Assemble the panelsSnap the wall and roof panels together following the assembly guide. No tools required. Align panels carefully before connecting, never force a join.Step 3 &#x2014; Connect the cablesMatch labelled connectors, male and female connections are labelled on each cable. Connect the infrared heating panels and red light panel to the control unit as indicated in the guide. Route and connect the control panel cable before closing the final wall panel.Step 4 &#x2014; Install the benchDepending on your model, the bench installs one of two ways:<ul><li style="font-size: 14px;">Slide-in bench &#x2014; align the bench to the internal rails and slide into place. It will lock naturally without any fasteners.</li><li style="font-size: 14px;">Screw-fix bench &#x2014; align the bench to the internal rails and secure using the screws provided.</li></ul>Both are equally solid check your assembly guide if you&apos;re unsure which applies to your unit.Step 5 &#x2014; Install the glass doorInstall the door last. The magnetic seal must align fully around the frame perimeter.Step 6 &#x2014; Power onPlug into your dedicated outlet and power on. Run the sauna empty at maximum temperature for 30&#x2013;40 minutes before your first session. A mild odour during this burn-off is completely normal and clears within 2&#x2013;3 uses.<hr>First useThe XEN heats up in 20&#x2013;30 minutes depending on your ambient room temperature. A good starting point is 140&#x2013;150&#xB0;F (60&#x2013;65&#xB0;C) you don&apos;t need to push straight to maximum.A few things worth knowing early on:<ul><li style="font-size: 14px;">Enter a few degrees below your target temperature. Letting the heat build around you is more effective and more comfortable than stepping into maximum heat.</li><li style="font-size: 14px;">Keep your first sessions to 20&#x2013;30 minutes while your body adjusts and build from there.</li><li style="font-size: 14px;">Use the red light panel during your session, not just before or after, the dual wavelength works best with sustained exposure.</li><li style="font-size: 14px;">The XEN produces a genuine sweat go in well hydrated and rehydrate immediately after.</li><li style="font-size: 14px;">Evening sessions are particularly effective for sleep&#xA0;the post-session core temperature drop triggers melatonin release, allow 30&#x2013;60 minutes between finishing and going to bed.</li></ul><hr>Care and maintenanceAfter every session<ul><li style="font-size: 14px;">Turn off and unplug from the wall</li><li style="font-size: 14px;">Leave the door open for 15&#x2013;20 minutes to dissipate heat and moisture</li><li style="font-size: 14px;">Wipe the bench and interior walls with a dry cloth</li><li style="font-size: 14px;">Always place a towel on the bench during use, this is the single most effective habit for long-term care of the cedar</li><li style="font-size: 14px;">Ensure the interior is fully dry before closing the door</li></ul>Monthly<ul><li style="font-size: 14px;">Vacuum interior surfaces to clear cedar dust and fibre buildup</li><li style="font-size: 14px;">Clean the glass door with a soft microfibre cloth only no abrasives, scrapers, or chemical sprays</li><li style="font-size: 14px;">Use a sauna-specific timber cleaner for the cedar interior</li></ul>Quarterly<ul><li style="font-size: 14px;">Check ventilation areas around the unit are clear</li><li style="font-size: 14px;">Inspect all power cables and connections for visible damage, cracking, or looseness, if anything looks off, stop use and <a href="https://getvitalplus.com/pages/contact" target="_blank" rel="noopener noreferrer">contact us</a> before the next session</li></ul>General<ul><li style="font-size: 14px;">Never place liquids, essential oils, or sprays inside the cabin</li><li style="font-size: 14px;">Do not use alcohol, bleach, solvent-based cleaners, or abrasive pads on any surface</li><li style="font-size: 14px;">For the glass door: soft microfibre or damp cloth only, dry immediately and never use scrapers or blades</li></ul>Seasonal storage<ul><li style="font-size: 14px;">Run one final session before packing down to fully dry the interior</li><li style="font-size: 14px;">Disassemble panels carefully and store flat or upright and never stack heavy items on top</li><li style="font-size: 14px;">Wipe all panels with a dry microfibre cloth before storing</li><li style="font-size: 14px;">Store in a dry, climate-controlled space away from direct sunlight and extreme temperature fluctuations; avoid garages or outdoor sheds unless well insulated</li><li style="font-size: 14px;">Wrap infrared panels loosely in breathable material, avoid airtight plastic which traps moisture</li><li style="font-size: 14px;">On reassembly, run an empty session for 20&#x2013;30 minutes before use to clear any residual moisture</li></ul>Dry climates<ul><li style="font-size: 14px;">Occasionally wipe the cedar with a lightly damp cloth to prevent over-drying and surface cracking</li></ul>Humid climates<ul><li style="font-size: 14px;">Ventilate frequently, leave the door open after each use, and ensure the cabin dries fully before closing</li></ul>

Premium Ranges

Setting Up Your Cedar Tub

Setting Up Your Acrylic Tub

Setting Up Your XEN Full Spectrum Infrared Sauna